BH-Silk Dark Purple
Serial Number: QD48 | Rating: 8/10 | $27

Notes: Has a layer shift at the very top.

Includes:
– (x1) Bowl Holder
– (x6) 18mm to 14mm Couplers
– Rubber feet to keep it from sliding around.

–
Serial Number: QD | Rating: /10 | $

Notes:

DS17-Black
Serial Number: QD1 | Rating: 8/10 | $35

Notes: Back two corners curl up slightly.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS37-Fluorescent Orange
Serial Number: QD2 | Rating: 7/10 | $40

Notes: Has a few under extrusion spots.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x3) 18mm to 14mm Coupler
– (x1) 5ml Silicone wax containers
– (x1) Non-stick silicone mat – 3.5″ diameter
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Blue
Serial Number: QD3 | Rating: 7.5/10 | $40

Notes: Under extrusion on the back z-seam and in a couple other areas.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Silk Red/Gold Copper
Serial Number: QD4 | Rating: 7/10 | $42

Notes: Has a few under extrusion areas.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Silk Bubble Gum
Serial Number: QD5 | Rating: 8/10 | $40

Notes: Under extrusion on the z-seam

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DST3-Blue
Serial Number: QD6 | Rating: 7/10 | $35

Notes: Prominent layer Lines

Includes:
– (x1) Dab station
– (x4) Terp Pearls
– (x2) 18mm to 14mm couplers
– (x2) Silicone rings for carb cap
– (x1) 8.5″ x 5.5″ Foam or silicone mat
– (x1) 5ml Silicone wax container
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DST3-Black
Serial Number: QD7 | Rating: 8/10 | $38

Notes: Under extrusion on the z-seam

Includes:
– (x1) Dab station
– (x4) Terp Pearls
– (x2) 18mm to 14mm couplers
– (x2) Silicone rings for carb cap
– (x1) 8.5″ x 5.5″ Foam or silicone mat
– (x1) 5ml Silicone wax container
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DST21-Blue
Serial Number: QD8 | Rating: 7.5/10 | $35

Notes: Slight under extrusion on z-seam. Some visible layer lines on the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) 5ml Silicone wax container
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS10-Silk Rainbow “?”
Serial Number: QD9 | Rating: 8.5/10 | $42

Notes: Slight under extrusion on z-seam. Some visible layer lines on the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Arabian Nights
Serial Number: QD10 | Rating: 9/10 | $50

Notes: Under extrusion on the z-seam in the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Silk Blue
Serial Number: QD11 | Rating: 7/10 | $40

Notes: Under extrusion on the z-seam and a few other minor areas.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Black
Serial Number: QD12 | Rating: 7/10 | $37

Notes: Missing dab tool holders.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Blue
Serial Number: QD13 | Rating: 9/10 | $40

Notes: Under extrusion on the z-seam in the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Black
Serial Number: QD14 | Rating: 8.5/10 | $38

Notes: Under extrusion on the z-seam.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Black
Serial Number: QD15 | Rating: 5/10 | $30

Notes: Early prototype. Under extrusion on the z-seam in the back and on both carp cap holders.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Black
Serial Number: QD16 | Rating: 5.5/10 | $30

Notes: Layer line towards the top, missing one of the dab tool holders, and slight under extrusion on the back of one of the carb caps.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Light Blue
Serial Number: QD17 | Rating: 9/10 | $40

Notes: Under extrusion on the z-seam on the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Light Blue
Serial Number: QD18 | Rating: 7.5/10 | $38

Notes: Blotchy extrusion on the back and carb caps.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Army Green
Serial Number: QD19 | Rating: 6.5/10 | $35

Notes: Under extrusion on the z-seam, one of the dab tool holders, and a couple other minor areas.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS10-Purple Haze
Serial Number: QD20 | Rating: 9/10 | $48

Notes: Under extrusion on the z-seam in the back.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone rings for carb cap
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS17(ish)-Silk Blue
Serial Number: QD21 | Rating: 6/10 | $25

Notes: Early prototype. Has a couple layer lines.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS17-Silk Rainbow “?”
Serial Number: QD22 | Rating: 9/10 | $40

Notes: A couple of minor under extrusions on the back of the posts.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS17-Apple Green
Serial Number: QD23 | Rating: 8.5/10 | $35

Notes: Layer line at the bottom.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS17-Sky Blue
Serial Number: QD24 | Rating: 5/10 | $28

Notes: Under extrusion on the z-seam and no top fill in the center.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DST20(ISH)-Silk Mint
Serial Number: QD25 | Rating: 6/10 | $32

Notes: Missing dab tool holders.

Includes:
– (x4) Terp pearls
– (x4) Silicone rings for carb cap
– (x1) 18mm to 14mm Coupler
– (x1) 5ml Silicone wax container
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS17-Apple Green
Serial Number: QD26 | Rating: 7.5/10 | $30

Notes: Layer line near the bottom.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 5ml Silicone wax containers.
– (x1) 18mm to 14mm Coupler
– (x1) Non-stick silicone mat – 5″ x 4″
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS33-Teal
Serial Number: QD27 | Rating: 8.5/10 | $67

Notes: Under extrusion on a few z-seam spots.

Includes:
– (x1) Dab station
– (x4) 18mm to 14mm Couplers
– (x4) Terp pearls
– (x3) Dividers
– (x2) Silicone rings for carb cap
– (x2) 5ml Silicone containers
– (x1) 8oz Cleaning jar
– (x1) LED Light (Requires (x3) AAA batteries, not included.)
– (x1) Remote for light
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS25_R1-Silk Emerald
Serial Number: QD28 | Rating: 7/10 | $45

Notes: Prototype to DS25, smaller storage area. Has a few areas of blotchy extrusion.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) Silicone rings for carb cap
– (x2) 5ml Silicone containers
– (x2) 18mm to 14mm Couplers
– (x1) LED Light (Requires (x3) AAA batteries, not included.)
– (x1) Remote for light
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS25-Silk Dark Periwinkle
Serial Number: QD29 | Rating: 8.5/10 | $53

Notes: Slightly over extruded seams.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) Silicone rings for carb cap
– (x2) 5ml Silicone containers
– (x2) 18mm to 14mm Couplers
– (x1) LED Light (Requires (x3) AAA batteries, not included.)
– (x1) Remote for light
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS25-Blue
Serial Number: QD30 | Rating: 8.5/10 | $45

Notes: Under extrusion on the z-seam.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) Silicone rings for carb cap
– (x2) 5ml Silicone containers
– (x2) 18mm to 14mm Couplers
– (x1) LED Light (Requires (x3) AAA batteries, not included.)
– (x1) Remote for light
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2-Dark Purple
Serial Number: QD31 | Rating: 7.5/10 | $25

Notes: Some z-seam lines and 1 layer line on the side.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_r12-bLUE
Serial Number: QD32 | Rating: 7.5/10 | $25

Notes: Prototype to DS2.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2.1-Apple Green
Serial Number: QD33 | Rating: 9/10 | $27

Notes: Very slight z-seam under extrusion.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R14-Blue
Serial Number: QD34 | Rating: 7/10 | $26

Notes: Prototype to DS2. Slight extrusion issue on one of the dab tool holder tips, and a bit on the carb cap which would be covered up by the silicone ring.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R16-Dark Purple
Serial Number: QD35 | Rating: 8.5/10 | $28

Notes: Prototype to DS2. Has some seam lines in the middle.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R5-Red
Serial Number: QD36 | Rating: 6/10 | $20

Notes: Prototype to DS2. Has some banding on the lower 10mm

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R13-Blue
Serial Number: QD37 | Rating: 8/10 | $27

Notes: Prototype to DS2. Slight extrusion issue on two of the dab tool holder tips.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R16-Black
Serial Number: QD38 | Rating: 9/10 | $28

Notes: Prototype to DS2. Has some seam lines in the middle.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around.

DS2_R11-Fluorescent Orange
Serial Number: QD39 | Rating: 8.5/10 | $28

Notes: Prototype to DS2. Slight banding on the lower middle area.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS2_R5-Blue
Serial Number: QD40 | Rating: 8/10 | $28

Notes: Prototype to DS2. Has a layer line towards the bottom.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS2_R5-Red
Serial Number: QD41 | Rating: 7/10 | $25

Notes: Prototype to DS2. Has some under extrusion on the back of one of the carp cap holders.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS2_R15-Black
Serial Number: QD42 | Rating: 8.5/10 | $28

Notes: Prototype to DS2. Slight extrusion issue on one of the dab tool holder tips.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x1) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS2_R5-Eggplant
Serial Number: QD43 | Rating: 6/10 | $20

Notes: Has an unintentional decorative banding around the middle.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DS2_R5-Dark Silver
Serial Number: QD44 | Rating: 9/10 | $28

Notes: Slight under extrusion on the side of one of the carb cap holders.

Includes:
– (x1) Dab station
– (x4) Terp pearls
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone wax containers
– (x2) Silicone ring for carb cap
– (x1) Glass ISO bottle (20ml)
– (x1) 3D Printed TPU cork replacement for ISO bottle
– Rubber feet to keep it from sliding around

DSCS5_R1-Light Blue
Serial Number: QD45 | Rating: 7/10 | $23

Notes: Prototype to DSCS5, but 10mm shorter. Under extrusion on the z-seam.

Includes:
– (x1) 3D printed cleaning tray
– (x4) Terp pearls
– (x1) 4oz ISO cleaning jar
– (x2) 18mm to 14mm Couplers
– (x2) 5ml Silicone containers
– Rubber feet to keep it from sliding around

DS-
Serial Number: QD | Rating: /10 | $

Notes:

GH1-Silk Purple
Serial Number: QD46 | Rating: 9/10 | $14

Includes:
– (x1) Grinder holder
– (x1) 18mm to 14mm Coupler
– Rubber feet to keep it from sliding around.

GH1-Silk Mint
Serial Number: QD47 | Rating: 8/10 | $14

Includes:
– (x1) Grinder holder
– (x1) 18mm to 14mm Coupler
– Rubber feet to keep it from sliding around.